The Aqua Computer AquagraFX 7950GX2 video card water block is a combination GPU and RAM cooler for the NVidia GeForce 7950 GX2. This cooler consists of two water blocks in one cooling both GPUs, both RAM and the PCIe switch on the lower card. The water flows through both blocks in parallel from one inlet port on the first block. This ensures and even flow through both and thus, even cooling on both GPUs. As the flow exits each block the water merges back to one port for outlet back into your loop. The red GPU disks are spring loaded to for height adjusting and to provide the right amount of pressure down on the GPUs. The slim design and black anodized finish provide a sleek look in elegant Aqua Computer fashion when installed on your 7950.

This water block is fit with G1/8 threads to be used with a variety of AC fitting types depending on your specific configuration and tube size.

Includes:
1) AquagraFX 7950 GX2 water block
2) mounting screws
3) Two rubber o-rings (must be used between the two blocks)
4) Thermal pads

1) Anodized black aluminum with red anodized aluminum GPU heat sink disks

2) Stanless steel Aqua Computer logo cover plates
3) Water cools both GPUs, both RAM and PCIe switch
4) One inlet and one outlet split parallel flow channels throughout water blocks
5) Requires one open PCI slot below the graphics slot
6) G 1/8 threads

Fittings:
pc-s Plug & Cool Straight Fittings for use with 6mm ID x 8mm OD AC Tubing
pc-b Plug & Cool Elbow Fittings for use with 6mm ID x 8mm OD AC Tubing
cmp6x1 Nickel Plated Elbow Compression Fittings for use with 6mm ID x 8mm OD Tubing
cmp8x1 Nickel Plated Elbow Compression Fittings for use with 8mm ID x 10mm OD Tubing
barb38 Nickel Plated Straight Barbed Fittings for use with 3/8″ ID Tubing